WebCategoryImage Phantom HSS-E Centre Drill DIN 332-D for threaded holes‚ 60°‚ with flat face M10 8‚5x10‚5mm
Drawing Phantom HSS-E Centre Drill DIN 332-D for threaded holes‚ 60°‚ with flat face M10 8‚5x10‚5mm
WebCategoryImage
Limited in stock | 2 pieces

Phantom HSS-E Centre Drill DIN 332-D for threaded holes‚ 60°‚ with flat face M10 8‚5x10‚5mm

158401000
WebCategoryImage Phantom HSS-E Centre Drill DIN 332-D for threaded holes‚ 60°‚ with flat face M10 8‚5x10‚5mm
Drawing Phantom HSS-E Centre Drill DIN 332-D for threaded holes‚ 60°‚ with flat face M10 8‚5x10‚5mm
WebCategoryImage
€162.60

DIN 332-D, straight shank, with flat face

To machining materialsdownload legend
Very adequate for unalloyed and low-alloyed steel ≤600 N/mm²
25-30E
Very adequate for Unalloyed and low-alloyed steel 600 - 850 N/mm²
20-40E
Very adequate for Alloyed steel 850 - 1000 N/mm²
16-22F
Very adequate for Stainless steel, ≤850 N/mm²
8-10D
Adequate for Stainless steel, >850 N/mm²
6-8C
Adequate for Grey cast iron GG HB<260
25-30E
Very adequate for Nodular and malleable cast iron HB<260
20-25D
Very adequate for Aluminium and Aluminium alloys
60-70E
Very adequate for Cast Aluminium Si 10 - 24%
50-80E
Adequate for Copper and copper alloys
30-40E
Adequate for Copper and Aluminium alloys
10-15D
2530
VC: 27 M/min,
Spindle speed n: 1012 RPM
Feed/Rev: 0.16 mm
Feed f: 162 mm/min

Filter to Your Perfect Variant

Select filters to quickly find the right variant.

  • 98.5% available from stock
  • Real time stock level check
  • Ordered before 19:00 on working days, shipped today
  • You can reach us till 18:00